1. Set up and use only on a flat, level, dry, well-ventilated surface. 2. All connections and conduits from the Generators to the load must only be installed by trained and licensed electricians, and in compliance with all relevant local, state, and federal electrical codes and standards, and other regulations where applicable. 3. Wear safety goggles during set up. 4. Inspect thoroughly before each use. Do not use if damaged. 5. Do not plug more than the specified number of watts into this cord. 6. Do not run Parallel Kit through doorways, holes in ceilings, walls or floors. 7. Use two of the same model generator. Do not use two different generator models. 8. Turn generators off before connecting the Parallel Kit. 9. Fully insert cable plugs into outlets. 10. Do not remove, bend or modify any metal prongs or pins of the Parallel Kit. 11. Do not use excessive force to make connections. 12. Keep away from water. 13. Keep Parallel Kit dry and away from wet ground and mud. 14. Do not drive, drag or place objects over Parallel Kit Cords. 15. Do not walk on Parallel Kit Cords.